Views: 0 Author: Site Editor Publish Time: 2023-02-09 Origin: Site
The aluminum plate is a smooth, beautiful, and corrosion-resistant material whose main component is high-purity aluminum. They are often seen in our factories and parks environments and it is used to create seating and tableware. Since aluminum panels are exposed all year round, it is difficult to avoid wind and rain. In order to prolong the service life of aluminum plates, usually, we should pay attention to cleaning and maintenance.
Here is the content list:
The use of aluminum plate
Aluminum plate cleaning and maintenance
1、Aluminum plate storage: the aluminum plate should be stored in a dry and ventilated place.
2、Aluminum plate handling: the aluminum plate should be lifted around the same time to avoid scratching the surface of the plate.
3、Aluminum plate cutting groove: When cutting the groove with an inserting machine or a gong machine, a half-round-head milling cutter should be used. Whether the damaged aluminum plate is too deep and shallow, or the aluminum plate not easy to fold, the 0.2-0.3mm thick plastic core should be bent with the aluminum plate to increase its strength and toughness. Otherwise, the aluminum plate may break or paint film rupture.
4. Aluminum plate bending: the edge is evenly stressed, and the aluminum plate is formed once and cannot be bent repeatedly.
5、Aluminum plate arc processing: special bending equipment should be used for arc processing, so that the plate gradually reaches the desired surface, and it shall not be bent at once.
6、Aluminum sheet batch: the same type of different batches of the aluminum sheet may have color differences. The sale and use of different batches of paper should increase the color difference comparison procedures.
7、Aluminum plate installation direction: the same color aluminum plate installed on the same plane. The flow direction should be consistent, otherwise, there will be a visual color difference.
8、Aluminum plate tearing film: After the aluminum plate is installed, we should tear off the protective film within 45 days. Otherwise, it will be difficult to tear off the film.
1、We should clean up surface stains and oil stains in time, wiping the surface with low PH value solvent. If the concentration is high, it is easy to cause corrosion on the aluminum plate, resulting in the aluminum plate corrosion damage to change the appearance and surface quality and performance, reducing the effect. Remember, we do not clean the hot plate surface (when the temperature exceeds 40 degrees), because the evaporation of moisture is too quickly harmful to the plate baking paint!
2、We need to clean the patterned aluminum plate, and choose the right cleaning tools, such as soft cotton rags and so on. In this way, it can be ensured that the aluminum plate will not cause excessive friction on its surface when cleaning and wiping it. Otherwise, after cleaning the dirty surface of the aluminum plate, there will be the presence of towel hair, which will affect the decorative effect of the aluminum plate.
3、We need to pay attention to grasp the frequency of cleaning, in order to avoid cleaning frequency. Otherwise, it is not conducive to prolonging the life of the aluminum plate, but also pay attention to avoid cleaning the aluminum plate which is still in a high-temperature state.
The above is for you to tell the method of extending the service life of aluminum plates, I hope it will be helpful to you. For more information, please visit other sections of this site. Our website is www.zwscaluminum.com
